Waterproofing cement mortar with osmotic action, certified for contact with drinking water.
FIELDS OF APPLICATION
• Resolution of infiltration problems in old and new masonry and concrete buildings
• Waterproofing of: internal and external walls in cellars, swimming pools, drinking water tanks, lift shafts, tunnels and foundation walls
COLORS
Gray
PACKAGING
Bag of 25 kg

Single-component flexible, fiber-reinforced, waterproofing and protective cementitious grout.
APPLICATION
• Waterproofing membrane before the installation of ceramic floor tiles indoors in bathrooms and showers
• Waterproofing membrane before the installation of ceramic floor tiles outdoors on balconies and terraces with medium surface (20-25 m2); enables to overlap a new floor, recovering the waterproofing, without demolishing the old floor
• Flexible and waterproof protection of concrete surfaces and of renders
• Waterproof and protective coating of concrete surfaces subject to chemical aggressions, such as anti-frost salts, sulphates, etc
• Waterproof and flexible levelling of micro-cracked renders
• Flexible levelling of concrete structures with thin sections, thus subject to load strain (e.g. prefabricated structures)
COLOURS
Grey
PACKAGES
20 kg bag

Two-component rapid elastic waterproofing and protective cementitious mortar.
FIELDS OF APPLICATION
• Waterproofing plaster and cement screeds before laying internal ceramic tiling,
in bathrooms and showers
• Waterproofing membrane before laying external ceramic tiling on balconies, terraces and
flat roofs
• Waterproofing “seasoned” concrete swimming pools (greater 6 months), before laying
ceramic coverings or mosaics
• Application on existing internal and external ceramic coverings; allows the overlapping of a
new tiling, restoring the waterproofing without demolishing the old floor
• Flexible and waterproof protection of concrete and plaster surfaces
• Waterproof and protective coatings of concrete surfaces subject to chemical aggression such as,
for example, antifreeze salts, sulphates, etc.
• Waterproof and flexible smoothing of plaster with micro-cracks
• Flexible smoothing of structures in concrete with thin and therefore highly deformable sections
COLORS
–
PACKAGING
Comp. A 20 kg bag – Comp. B 16 kg can

Two-component elastic waterproofing and protective cementitious mortar.
FIELDS OF APPLICATION
• Waterproofing membrane before laying indoor ceramic floors in bathrooms and showers
• Waterproofing membrane before laying outdoor ceramic floors on balconies and terraces,
it allows a new floor to be laid over, restoring the waterproofing, without demolishing
the old
• Protection flexible and waterproof of concrete surfaces and plasters
• Waterproof and protective coatings of concrete surfaces subject to chemical aggression
such as, for example, antifreeze salts, sulphates, etc.
• Waterproof and flexible smoothing of plaster with micro-cracks
• Flexible smoothing of concrete structures with thin sections and therefore subject to deformation under
load (e.g. prefabricated structures)
• Waterproofing of “seasoned” concrete swimming pools (longer than 6 months)
COLORS
–
PACKAGING
Comp 24 Kg bag – comp. B 8 kg tank

Ready-to-use medium-fast drying screed with high thermal conductivity 2.0 W/mK.
FIELDS OF APPLICATION
• Realization of quick-drying screeds both floating (with a minimum thickness of 4 cm) and anchored (using Latex G 100 grout, Starcem, water) intended for laying wooden, PVC, carpet, linoleum and ceramic floors.
• It is also suitable for making screeds incorporating heating coils.
COLORS
Gray
PACKAGING
25 kg bag

Medium-fast drying binder for screeds.
FIELDS OF APPLICATION
Making medium-fast drying screeds both floating and anchored for laying wooden, PVC, carpet, linoleum, ceramic and stone material floors. Suitable for making screeds incorporating heating coils.
COLORS
Gray
PACKAGING
20 kg bag

Ultra-fast setting self-levelling compound for thicknesses from 3 to 30 mm.
FIELDS OF APPLICATION
Indicated in cases where it is necessary to level and make flat traditional substrates or pre-existing floors (prepared in advance), where rapid commissioning or significant resistance to intense traffic is required. For indoors only.
COLORS
Gray
PACKAGING
25 kg bag

Ultra-fast setting self-levelling compound for thicknesses up to 10 mm.
FIELDS OF APPLICATION
Indicated in cases where it is necessary to level and make flat traditional substrates or pre-existing floors (prepared in advance), where rapid commissioning or significant resistance to intense traffic is required. For indoors only.
COLORS
Beige
PACKAGING
25 kg bag

Cementitious leveling compound with high thermal conductivity (1.70 W/mK) for thicknesses from 3 to 40 mm, suitable for underfloor heating systems of low thickness. Very low emission of volatile organic compounds (EC1 plus).
FIELDS OF APPLICATION
Indicated in cases where it is necessary to level and level traditional substrates such as
heated and non-heated cement screeds, or to incorporate low-thickness heating systems positioned
on top of old cement screeds or tiling.
COLORS
Beige
PACKAGING
25 kg bag

High-strength skim coat for concrete and cementitious substrates.
FIELDS OF APPLICATION
• Smoothing plastered walls and screeds with irregular surfaces, before proceeding with the laying of ceramics, decorative coverings or painting •
Smoothing new or old concrete walls, prefabricated panels, joints between slabs of predalles slabs
• Can be painted over or both mineral and synthetic decorative coatings
COLORS
White and gray
PACKAGING
25 kg bag

High adhesion water-repellent skim coat for plastic and concrete coatings.
FIELDS OF APPLICATION
• Smoothing old solid and well-anchored plastic or mineral coatings
• Smoothing old solid and well-anchored quartz paint
• Smoothing before laying ceramic tiles
• Smoothing cement-based plaster
• Smoothing concrete
COLORS
White and gray
PACKAGING
Bag of 25kg

High adhesion water-repellent skim coat for plastic and concrete coatings.
FIELDS OF APPLICATION
• Smoothing old solid and well-anchored plastic or mineral coatings
• Smoothing old solid and well-anchored quartz paint
• Smoothing before laying ceramic tiles
• Smoothing cement-based plaster
• Smoothing concrete
COLORS
White and gray
PACKAGING
Bag of 25kg

Universal water-repellent smoother, with very high adhesion.
FIELDS OF APPLICATION
• Smoothing before laying ceramic tiles
• Smoothing lime and cement-based plasters, even if painted
• Smoothing cement-based plasters
• Smoothing concrete
• Smoothing old plastic or mineral coatings that are consistent and well anchored
• Smoothing old ceramic and mosaic, provided they are stable and consistent
COLORS
White and gray
PACKAGING
25 kg bag

Universal water-repellent smoother, with very high adhesion.
FIELDS OF APPLICATION
• Smoothing before laying ceramic tiles
• Smoothing lime and cement-based plasters, even if painted
• Smoothing cement-based plasters
• Smoothing concrete
• Smoothing old plastic or mineral coatings that are consistent and well anchored
• Smoothing old ceramic and mosaic, provided they are stable and consistent
COLORS
White and gray
PACKAGING
25 kg bag

Lime-cement based skim coat for fresh and seasoned plasters. Civil finish.
FIELDS OF APPLICATION
• Finishing of traditional or premixed lime-cement-based plasters with the “fresh on fresh” technique
• Finishing of traditional or premixed seasoned lime-cement-based plasters
• Can be overcoated with thin mineral or synthetic paints or coatings
COLORS
White and gray
PACKAGING
25 kg bag

Lime-cement skim coat with excellent whiteness and excellent workability, for fresh and seasoned plasters. Civilian finish. Very low VOC emission values ​​(EC1 plus).
FIELDS OF APPLICATION
• Finishing of traditional or premixed lime-cement based plasters with the “fresh on fresh” technique.
• Finishing of traditional or seasoned lime-cement based premixed plasters.
• Recoatable with both mineral and synthetic paints or thin coatings.
COLORS
White
PACKAGING
25 kg bag

White extra-fine levelling grout for render and concrete walls with smooth finishing.
APPLICATION
• Levelling of renders based on lime and cement
• Levelling of smooth concrete free of oily strippers indoors
• Levelling of Adesan restoration renders
COLOURS
White
PACKAGES
20 kg bag

Single-component powder adhesive – skim coat for laying insulating panels.
FIELDS OF APPLICATION
Internal and external laying of insulating panels with suitable and compliant surfaces:
• Expanded and extruded polystyrene
• Expanded polyurethane
• Glass wool of suitable density
• Rock wool of suitable density
• Insulating cork
• Sound-absorbing panels on following types of support: traditional plasters; concrete brick masonry and cement blocks
• Particularly suitable also for the final smoothing of insulating panels with a suitable and compliant surface
COLORS
White and Gray
PACKAGING
25 kg bag

Single-component powder adhesive/levelling grout for the installation of over-coating insulating panels.
APPLICATION
For the indoor and outdoor installation of insulating panels with suitable and consistent surfaces:
• Foam and extruded polystyrene
• Foam polyurethane
• Glass wool with suitable density
• Rock wool with suitable density
• Insulating cork
• Sound-deadening panels on the following substrates: traditional renders, concrete, bricks and cement blocks.
• Especially recommended for the final levelling of insulating panels, with suitable and consistent surface.
COLOURS
Grey
PACKAGES
25 kg bag

Single-component powder adhesive – skim coat for laying insulating panels.
FIELDS OF APPLICATION
Internal and external laying of insulating panels with suitable and compliant surfaces:
• Expanded and extruded polystyrene
• Expanded polyurethane
• Glass wool of suitable density
• Rock wool of suitable density
• Insulating cork
• Sound-absorbing panels on following types of support: traditional plasters; concrete brick masonry and cement blocks
• Particularly suitable also for the final smoothing of insulating panels with a suitable and compliant surface
COLORS
White
PACKAGING
25 kg bag

Adhesive and smoothing powder for laying cellular concrete blocks.
FIELDS OF APPLICATION
• Assembling and gluing expanded cellular concrete blocks
• Smoothing walls formed with expanded cellular concrete blocks
• For interiors and exteriors
COLORS
White
PACKAGING
25 Kg bag

Lightened dehumidifying premixed plaster for the restoration of damp masonry.
FIELDS OF APPLICATION
• Restoration of brick walls affected by rising damp
• Restoration of porous stone walls
• Recovery of walls degraded by salt efflorescence
COLORS
Gray
PACKAGING
20 kg bag

Breathable fibre-reinforced mortar with high mechanical performance based on natural hydraulic lime (NHL) and eco-pozzolan for breathable plaster and masonry.
FIELDS OF APPLICATION
• Realization by machine or by hand of new breathable plasters with high mechanical performance inside and outside on stone, brick, tuff and mixed masonry not subject to capillary rising damp
• Realization of new plasters or reconstruction of old ones lime-based plasters on masonry of historical and artistic value
• Creation of new reinforced plasters
• Creation of reinforced caps on the extrados of vaults
• Pointing of courses between stones, bricks and tuff on “face-to-face” masonry
• Creation of facing walls with a masonry mortar with high mechanical performance (superior to traditional lime-based mortars)
COLORS
Beige
PACKAGING
25 kg bag

Premixed rendering mortar, transpiring, improves the adhesion of the dehumidifying plaster. Salt resistant. Very low VOC emissions (EC1 plus).
FIELDS OF APPLICATION
• Restoration of masonry with loose, very porous, mechanically weak surfaces or waterproof coatings
• For masonry degraded by rising damp or salts
• Suitable for stone, brick, tuff
COLOR
Light Gray
PACKAGING
25 kg bag

Skim coat based on aerial and hydraulic binders, for Adesan restoration plasters. Civil finish.
FIELDS OF APPLICATION
• Finishing traditional or premixed Adesan plasters with the “fresh on fresh” technique
• Finishing traditional or premixed Adesan seasoned plasters
• Can be overcoated with thin, breathable paints or coatings
COLORS
White
PACKAGING
25 kg bag

Single-layer plaster that combined dehumidifying and rendering functions in a single product. Very low VOC emissions (EC1 plus).
APPLICATION
• Restoration of indoor and outdoor brick, stone, tuff or mixed walls affected by rising damp and/or saline efflorescence.
• Recovery of walls degraded by saline efflorescence near lakes or sea
• Sealing of joints between stones, bricks and tuff on external façade walls.
COLOURS
Light grey
PACKAGES
20 kg bag

Transpiring base plaster based on natural hydraulic lime (NHL) and eco-pozzolan.
FIELDS OF APPLICATION
• Realization by machine or by hand of new breathable plasters inside and outside on stone, brick, tuff and mixed masonry not subject to capillary rising damp • Realization
of new plasters or reconstruction of old lime-based plasters on masonry of historical and artistic value
• Pointing of courses between stones, bricks and tuff on “face-to-face” masonry
COLORS
Beige
PACKAGING
25 kg bag

Premixed machine and hand dehumidifying plaster for the restoration of damp masonry and the plastering of new masonry.
FIELDS OF APPLICATION
• Restoration of brick walls affected by rising damp
• Restoration of porous stone walls
• Recovery of walls degraded by saline efflorescence
• Highly breathable background plaster for new walls
COLORS
Gray
PACKAGING
25 kg bag

Traditional lime-based bonding mortar to be applied before restoration plaster ADESAN CALCE INTONACO WHERE TO USE ADESAN CALCE INTONACO bonding
layer
for restoration plaster on:
• old and new brick masonry
• masonry with strong saline efflorescence
• masonry in stone and tuff
COLORS
White
PACKAGING
20 kg bag

Lime and eco-pozzolana-based skim coat resistant to salts, transpiring, for the civil finishing of plasters. Very low VOC emissions (EC1 plus).
FIELDS OF APPLICATION
• Smoothing of dehumidifying plasters with a civil finish to complete the restoration cycle of masonry subject to rising damp
• Smoothing of dehumidifying plasters made in areas near the sea
• Smoothing of lime-based plasters, even on buildings of historical and artistic
COLORS
White
PACKAGING
25 kg bag

Salt-resistant mortar for dehumidifying, macroporous, lime-based and eco-pozzolana-based plasters for the restoration of damp masonry, including historic ones. Very low VOC emissions (EC1 plus).
FIELDS OF APPLICATION
• Restoration of brick or porous stone walls affected by rising damp.
• Formation of dehumidifying plaster on structures located near wetlands.
• Recovery of masonry degraded by efflorescence.
• Restoration of plaster of artistic interest (historic centres, churches, villas) under the protection of the Superintendence for Architectural and Environmental Heritage, where a definitive restoration is required in respect of the original materials.
COLORS
White
PACKAGING
25 kg bag

Ultra-fast setting mortar for fixings.
FIELDS OF APPLICATION
TURBOCEM is indicated for small building works where very rapid installation is required, such as:
• Fixing of armored doors
• Fixing of electrical boxes, ducts, sheaths and pipes
• Fixing of gratings and window frames
• Blocking of small infiltrations of COLORS Gray PACKAGING 25 kg bag – 4×5 kg
box

Quick-setting, non-shrinkage pourable mortar for repairing industrial concrete floors, for fixing road wells and street furniture.
FIELDS OF APPLICATION
• Structural restoration by pouring highly degraded concrete
• Quick restoration of industrial concrete floors
• Quick restoration of road works and airport floors
• Repair of road pavements
• Fixing manholes and road manhole covers
• Fixing signage
• Fixing of fences and street furniture
• Anchoring of posts and protective barriers
COLORS
Gray and black
PACKAGING
25 kg bag

Fibre-reinforced fine anti-shrinkage thixotropic mortar with normal setting for the cortical restoration of concrete.
FIELDS OF APPLICATION
• Restoration of deteriorated concrete structures on horizontal and vertical surfaces
• Restoration of the cortex of pillars, balcony fronts, floors, steps, string courses
• Reconstruction of the concrete cover layer in reinforced concrete structures
• Filling of rigid joints
COLORS
Gray
PACKAGING
Bag from 25 kg

Rapid thixotropic mortar for cortical restoration and concrete smoothing.
Mortar for fixings.
Fibre-reinforced, thixotropic, quick setting, with very low emission of volatile organic compounds (EC1 plus)
FIELDS OF APPLICATION
• Surface restoration of beams, pillars, concrete infill panels
• Restoration of front edges of cornices, balconies, under balconies
• Smoothing small surfaces
• Fixings in semi-rapid times
COLORS
Gray
PACKAGING
25 Kg bag

Single-layer cement mortar that allows the restoration and final smoothing of the concrete in a single step.
Fibre-reinforced, thixotropic, quick setting, with very low emission of volatile organic compounds (EC1 plus)
FIELDS OF APPLICATION
• Surface repair of edges of beams, pillars, concrete infill panels
• Repair of front edges of cornices, balconies, under balconies and string courses
• Quick-setting smoothing of small surfaces
COLORS
Gray
PACKAGING
25 kg bag

Normal-setting thick fibre-reinforced thixotropic anti-shrinkage mortar for repairing concrete.
FIELDS OF APPLICATION
• Restoration of deteriorated horizontal and vertical concrete structures
• Restoration of the cortex of pillars, balcony fronts, floors
• Reconstruction of the concrete cover layer on reinforced concrete structures
• Filling of rigid joints
N.B. Adegrout Maxi is characterized by a high mechanical resistance; its use is therefore recommended
for structural repairs on substrates with adequate mechanical resistance. For the most common repairs
we recommend the use of Thixotropic Adegrout characterized by medium
mechanical resistance.
COLORS
Gray
PACKAGING
25 kg bag

Fibre-reinforced, non-shrink pourable mortar for the structural restoration of concrete.
FIELDS OF APPLICATION
• Structural restoration of horizontal and vertical concrete surfaces
• Reconstruction of the floor layer following the elimination of deteriorated parts
• Section increases on load-bearing structures
• Restoration of concrete and reinforced concrete structures where complex geometries require the use of a pourable mortar
COLORS
Gray
PACKAGING
25 Kg bag

Trowelable, fibre-reinforced, quick-setting cementitious mortar for leveling horizontal and vertical surfaces in thicknesses from 3 to 30 mm indoors and outdoors.
FIELDS OF APPLICATION
• Restoration and regularization of slopes on terraces and balconies
• Regularization of reinforced concrete surfaces of swimming pools to make them suitable for waterproofing
with Adeproof sheaths and subsequent laying of ceramic and mosaic
• Internal and external leveling of slabs in concrete (adequately prepared)
• Smoothing of cement screeds or screeds based on special binders (Starcem, Starcem Pronto 2.0)
• Smoothing old ceramic floors, terrazzo, stone material before installing tiles or
stone material that is not sensitive to humidity (after adequate preparation and application of Adegrip Eco)
• Smoothing old floors (adequately prepared) before applying Adeproof sheaths
COLORS
Gray
PACKAGING
25 kg bag

Anti-corrosive cementitious grout for reinforcing irons.
APPLICATION
• Protection from corrosion of reinforcing irons in concrete
• Adhesion promoter for restoration grouts
COLOURS
Blue
PACKAGES
4×5 kg box

Self-grouting adhesive for laying and simultaneously grouting glass blocks.
FIELDS OF APPLICATION
• Indoor installation of glass blocks for the construction of vertical walls
• For outdoor installation it is necessary to mix VETROSYSTEM with IMPER 21 latex in total replacement of the water
COLORS
White and pearl gray
PACKAGING
4×5 kg box

Cement-based water-repellent decorative sealant for grouting between 0 and 6 mm of ceramic tiles. Available in 40 colors in the 4 collections: wood, color, cement, earth.
FIELDS OF APPLICATION
• Grouting porcelain stoneware tiles, porous ceramics, natural stones with joints between 0 and 6 mm with a smooth finish • Particularly
suitable for grouting swimming pools, saunas, wellness centres, bathrooms and showers
• For grouting outdoor floors and walls where increased impermeability, elasticity and high mechanical resistance are required, Fugamagica Zerosei Materia must be mixed with Imper 21 to completely replace the water
COLORS
Available in 40 colors
PACKAGING
25 kg bag – 4×5 kg box – 4×2 kg box

Technical sealant, with coarse-grained finish, cement-based and water-repellent, for grouting between 3 and 20 mm of ceramic tiles.
FIELDS OF APPLICATION
• Grouting porcelain stoneware tiles, porous ceramics, natural stones with joints between 3 and 20 mm with a rough finish level • Particularly
suitable for grouting swimming pools, saunas, wellness centres, bathrooms and showers
• For grouting outdoor floors and walls where increased impermeability, elasticity and high mechanical resistance are required, Fugamagica 3-20 BIO Materia Tech must be mixed with Imper 21 to completely replace the water
COLORS
Available in 5 colors
PACKAGING
25 kg bag – 4×5 kg box

High performance cementitious sealant with medium grain for grouting ceramic tiles from 2 to 12 mm.
APPLICATION
Fugamagica 2-12 is suitable in the following cases:
• Grouting of tiles with joint from 2 and 12 mm
• For grouting outdoor floors and walls where waterproofing, flexibility and high mechanical resistance are
required, Fugamagica 2-12 shall be mixed with Imper 21 replacing the water completely
COLOURS
Available in 5 colours
PACKAGES
25 kg bag – 4×5 kg box

Technical cement-based sealant with ultra smooth finish and reduced water absorption, for grouting 0-4 mm joints between ceramic tiles.
APPLICATION
Fugamagica 0-4 Materia Tech is suitable in the following cases:
• Grouting of tiles with joints up to 4 mm
• Grouting of tiles installed nearby
• For grouting outdoor floors and walls where waterproofing, flexibility and high mechanical resistance are required, Fugamagica 0-4 Materia Tech shall be mixed with Imper 21 replacing the water completely
COLOURS
Available in 5 colours
PACKAGES
4×5 kg box

Improved cementitious adhesive with long open time for vitrified materials.
WHERE TO USE
Indoor and outdoor laying of ceramic tiles on traditional cement-based renders and screeds: medium-size, terracotta, single-fired and double-fired porcelain stoneware.
PACKAGING
25 kg bag.
COLORS
White and grey

High performance cementitious adhesive, quick setting and zero vertical slip. Ideal for marble and natural stone.
FIELDS OF APPLICATION
• Indoor and outdoor rapid installation, on traditional substrates, of ceramic tiles of all types: porcelain stoneware, klinker, terracotta, single-fired, double-fired •
Installation of natural stone, granite, light colored marble and recomposed materials stable at humidity
• Rapid overlapping of ceramic on ceramic, tiles, natural stones
COLORS
White and gray
PACKAGING
White 23 kg bag – gray 25 kg bag

Single-component, deformable S1 cementitious adhesive with very high performance. Designed for laying large porcelain stoneware slabs.
FIELDS OF APPLICATION
•  Laying all types of ceramic material indoors and outdoors (porcelain stoneware, double-fired, single-fired, Klinker).
• Indoor and outdoor laying of stone materials (provided they are stable and insensitive to humidity).
• Laying ceramic tiles on heated floors and cement plasters.
• Point gluing of insulating and/or sound absorbing materials such as expanded polystyrene and polyurethane, rock or glass wool, cork.
• Installation of floors subject to heavy traffic.
• Installation on deformable substrates: plasterboard, fiber cement, marine plywood, wood agglomerates (suitably prepared, water-stable and free from treatments)
• Installation on prefabricated concrete walls and on cured concrete substrates.
• Laying of ceramic on ceramic, stone material, tiles (adequately prepared).
• Laying of floors and walls on substrates waterproofed with ADEPROOF membranes.
COLORS
White and Gray
PACKAGING
25 kg bag

Single-component, highly performing, cementitious, S1 deformable adhesive. Studied for installing large porcelain stoneware slabs.
APPLICATION
• Indoor and outdoor installation of every type of ceramic material (porcelain stoneware, double firing, single firing, klinker)
• Indoor and outdoor installation of stone materials (if solid and non-absorbing)
• Installation of ceramic tiles on heating floors and cementitious renders
• Spot bonding of insulating and/or sound-absorbing materials such as foam polyurethane and polystyrene, rock or glass wool, cork
• Installation of floors with heavy traffic
• Installation on deformable substrates: gypsum board, asbestos cement, marine-type plywood, wood composition panels (suitably prepared, solid to water and not treated)
• Installation on prefabricated concrete walls and on cured concrete substrates
• Installation of ceramic tiles on ceramic, stone material and terrazzo tiles (suitably prepared)
• Installation of wall and floor ceramic tiles on substrates water-proofed by Adeproof membranes
COLOURS
Flahs white
PACKAGES
25 kg bag

Single-component, highly performing, cementitious, S1 deformable adhesive. Studied for installing large porcelain stoneware slabs.
APPLICATION
• Indoor and outdoor installation of every type of ceramic material (porcelain stoneware, double firing, single firing, klinker)
• Indoor and outdoor installation of stone materials (if solid and humidity-proof)
• Installation of ceramic tiles on heating floors and cementitious renders
• Spot bonding of insulating and/or sound-absorbing materials such as foam polyurethane and polystyrene, rock or glass wool, cork
• Installation of floors with heavy traffic
• Installation on deformable substrates: gypsum board, asbestos cement, marine-type plywood, wood composition panels (suitably prepared, solid to water and not treated)
• Installation on prefabricated concrete walls and on cured concrete substrates
• Installation of ceramic tiles on ceramic, stone material and terrazzo tiles (suitably prepared)
• Installation of wall and floor ceramic tiles on substrates water-proofed by ADEPROOF membranes
COLOURS
White and grey
PACKAGES
25 kg bag

High performance deformable cementitious adhesive, long open time and zero vertical slip, for thicknesses from 3 to 20 mm.
FIELDS OF APPLICATION
• Laying large-format ceramic tiles and stable natural stones on cementitious screeds, including irregular ones (up to a thickness of 20 mm)
• Laying split terracotta (extracted) and klinker on cementitious screeds
• Overlapping ceramic tiles on ceramic tiles, natural stone
• Laying heated floors
• Laying floors and walls on waterproofed substrates with Adeproof sheaths
• Laying any type of ceramic on floors and walls, indoors and outdoors
• Laying floors subject to heavy traffic
COLORS 
White and gray
PACKAGING
25 kg bag

Cementitious adhesive with accelerated setting and zero vertical slip, ideal for porcelain stoneware.
FIELDS OF APPLICATION
• Indoor and outdoor rapid installation on plaster and cement screeds of ceramic tiles: porcelain stoneware, klinker, terracotta, single-fired, double-fired and stable stone materials • Floor
overlaying of medium-sized ceramic tiles on ceramic, tiles and medium-stable natural stone
• Laying of ceramics on heated floors
• Laying of ceramics on plasterboard
• Laying of ceramics on waterproofing layers made with Adeproof sheaths
• Laying of insulating panels indoors
• Laying of small and medium-sized, stable natural stone and reconstituted marble to humidity
COLORS
Grey
PACKAGING
25 kg bag

High performance cementitious adhesive, with extended open time and null vertical slip, ideal for porcelain stoneware.
APPLICATION
• Indoor and outdoor installation on cementitious renders and screeds of any ceramic tile: porcelain stoneware, klinker, terracotta, single and double fired tiles, solid stone materials
• Installation of ceramic tiles (size up to 900 cm2) on ceramic, terrazzo tiles and solid natural stones
• Ceramic installation on heating floors
• Installation of ceramic tiles in terraces and balconies
• Installation of ceramic tiles on gypsum board
• Installation of ceramic tiles on waterproofing substrates prepared with ADEPROOF membranes
• Installation of insulating panels indoors
COLOURS
White and grey
PACKAGES
25 kg bag

Normal cementitious adhesive for laying ceramic tiles.
WHERE TO USE
Laying double-fired and single-fired ceramic tile floors and walls.
COLORS
White and gray
PACKAGING
25 kg bag

Special cement-based adhesive with no vertical slip for ceramic tiles.
APPLICATION
Installation of wall and floor ceramic tiles. Mixed with Latex EL 300 completely replacing the water, it
is particularly recommended for the installation of glassy ceramic mosaics, even in swimming-pools or
substrates water-proofed with Adeproof membranes.
COLOURS
White
PACKAGES
25 kg bag

Special single-component super-white cementitious adhesive for laying all types of ceramic material on floors and walls. Specific for glass mosaic also in immersion.
FIELDS OF APPLICATION
• Laying ceramic tile floors and walls and both ceramic and glass mosaics, even in water immersion.
• Laying ceramic and glass mosaic on cementitious substrates and substrates waterproofed with Adeproof Elastocem, Adeproof Mono and Guainalastic
• Laying double-fired, single-fired ceramic, porcelain stoneware indoors and outdoors
• Laying mosaic in swimming pools
• Laying ceramic floors overlaid on ceramics, tiles, natural stones
• Laying floors subject to heavy traffic
• Installation on heated floors
• Installation of tiles and mosaics on plasterboard panels (previously treated with PRIMER GS)
COLORS
White
PACKAGING
25 kg bag

S1 deformable cementitious adhesive for the installation of every type of ceramic material. Designed for large sized ceramic floor slabs.
APPLICATION
• Indoor and outdoor installation of porcelain stoneware on cementitious screeds
• Installation of terracotta, single fired tiles, stoneware and klinker on cementitious screeds and renders
• Indoor installation of medium and large sized porcelain and marble stoneware even on existing surfaces of ceramic, terrazzo tiles, natural stones
• Installation on heating floors
• Installation of floors with heavy traffic
COLOURS
White and grey
PACKAGES
25 kg bag

Cementitious adhesive for laying all types of ceramic material. Specific for large floor surfaces.
FIELDS OF APPLICATION
• Laying stable natural stone on cement-based screeds
• Laying terracotta, single-fired, stoneware and clinker tiles on cement-based screeds and plasters
• Laying medium-sized porcelain stoneware and marbled stoneware, including overlaying indoors on ceramic, tiles, natural stone
• Installation on heated floors
• Installation of any type of ceramic, indoors and outdoors
• Installation of floors subject to heavy traffic
COLORS
White and gray
PACKAGING
25 kg bag

Quick-setting, deformable, high-performance, water-repellent cementitious adhesive for laying ceramic tiles and natural stone. Ideal for laying on Adesital waterproofing membranes.
FIELDS OF APPLICATION
• Indoor and outdoor rapid installation, on Adesital waterproofing membranes and on traditional substrates, of all types of ceramic tiles: porcelain stoneware, klinker, terracotta, single-fired, double-fired • Installation of natural stone, granite, colored
marble and recomposed materials stable in humidity
• Rapid overlapping of ceramic on ceramic, tiles, natural stones
COLORS
Gray
PACKAGING
25 kg bag

Cementitious adhesive with extended open time, null vertical slip and excellent workability for the installation of ceramic tiles.
APPLICATION
Installation of single and double fired wall and floor ceramic tiles with medium porosity on cementitious substrates such as screeds and renders.
COLOURS
White and grey
PACKAGES
25 kg bag – 4×5 kg box alupack

Cementitious adhesive with long open time and great workability for laying ceramic tiles.
WHERE TO USE
Laying medium porosity double-fired and single-fired ceramic floor and wall coverings.
COLORS
White and gray
PACKAGING
25 kg bag

Cementitious adhesive with mixed binders, with extended open time for vitrified materials.
APPLICATION
• Indoor and outdoor installation of every type of ceramic material (porcelain stoneware, double firing, single firing, klinker)
• Indoor and outdoor installation on traditional cementitious renders and screeds of any ceramic tile: medium-sized porcelain stoneware, terracotta, single and double fired
• Spot bonding of insulating materials such as: foam polyurethane and polystyrene, rock or glass wool and sound-absorbing panels
• Indoor overlapping with medium sized porcelain stoneware tiles on existing ceramic floors
• Installation on gypsum board
• Installation of porcelain stoneware on cementitious screeds with heating system
COLOURS
White and grey
PACKAGES
25 kg bag – 4×5 kg box alupack

Single-component, very highly performing lightened cementitious adhesive, highly deformable S2, with an internal technology combining very high performance and easy spreadability with reduced dust formation while preparing the mix. Very low VOC emissions (EC1 plus)

APPLICATION
• Indoor and outdoor installation of every type of ceramic material (porcelain stoneware, double firing, single firing, klinker)
• Installation of thin slabs in porcelain stoneware without reinforcing mesh.
• Indoor and outdoor installation of stone materials, if dimensionally solid and non-absorbing
• Installation of ceramic tiles on heating floors and cementitious renders
• Bonding of insulating and/or sound-absorbing materials such as foam polyurethane and polystyrene, rock or glass wool, cork.
• Installation of floors with heavy traffic
• Installation on deformable substrates such as gypsum board, asbestos cement, marine-type plywood, wood composition panels (solid to water and not treated) and when it is necessary to reduce the load on the bearing structures.
• Installation of ceramic and solid stone material on façades, balconies, terraces and sun stone pavements, subject to direct sun rays and sudden temperature changes
• Installation on prefabricated concrete walls and on cured concrete substrates
• Installation of ceramic tiles on ceramic, stone material and terrazzo tiles suitably prepared
• Installation on cementitious and anhydrite screeds, after suitable preparation and application of PRIMER GS
• Installation of wall and floor ceramic tiles on substrates water-proofed by ADEPROOF membranes.

COLOURS
Withe and Grey

PACKAGES
15 kg bag

S1 deformable, lightweight, rapid-setting, one-component cementitious adhesive with an internal technology that combines very high performance and easy trowelability with a reduction in the formation of dust during the mix preparation phase. Very low VOC emissions (EC1 plus).

FIELDS OF APPLICATION
• Indoor and outdoor installation of all types of ceramic material (porcelain stoneware, double-fired, single-fired, Klinker)
• Installation of thin porcelain stoneware slabs without reinforcing mesh
• Indoor and outdoor installation of materials stone, provided they are dimensionally stable and insensitive to humidity, which require the use of quick adhesives
• Installation of ceramic tiles on heated floors and cement-based plasters
• Installation of floors subject to heavy traffic
• Installation on deformable substrates: plasterboard, fiber cement, marine plywood , wooden agglomerates (provided they are stable in water, free from treatments and adequately prepared) and when it is necessary to reduce the load on the load-bearing structures
• Laying ceramic and stable stone material on balconies, terraces, flat roofs, subject to direct radiation and sudden changes in temperature •
Laying on prefabricated concrete walls and on cured concrete substrates
• Laying ceramic on ceramic, stone material, tiles (suitably prepared) where it is necessary to reopen them quickly for operation
• Laying on cementitious and anhydrite screeds, after adequate preparation and application of PRIMER GS
• Laying of floors and walls on waterproofed substrates with ADEPROOF sheaths

COLORS
White and grey

PACKAGING
15 kg bag

S1, one-component, lightweight, deformable cementitious adhesive with an internal technology that combines very high performance and easy trowelability with a reduction in the formation of dust during the mix preparation phase. Very low VOC emission values ​​(EC1 plus).

FIELDS OF APPLICATION
• Laying all types of ceramic material in interiors and exteriors (porcelain stoneware, double-fired, single-fired, Klinker)
• Laying thin porcelain stoneware slabs without reinforcing mesh.
• Indoor and outdoor installation of stone materials, provided they are dimensionally stable and insensitive to humidity
• Installation of ceramic tiles on heated floors and cement-based plasters
• Bonding of insulating and/or sound-absorbing materials such as expanded polystyrene and polyurethane, rock wool or glass, cork
• Laying floors subject to heavy traffic
• Laying on deformable substrates such as plasterboard, fiber cement, marine plywood, wood agglomerates (provided they are resistant to water and free from treatments) and when it is necessary to reduce the load on the load-bearing structures • Laying
ceramic and stable stone material on facades, balconies, terraces , flat roofs, subject to direct radiation and sudden changes in temperature
• Laying on prefabricated concrete walls and on seasoned concrete substrates
• Laying of ceramic on ceramic, stone material, adequately prepared marble tiles
• Laying on cementitious and anhydrite screeds, after adequate preparation and application of PRIMER GS
• Laying floors and walls on substrates waterproofed with ADEPROOF membranes.

COLORS
White and grey

PACKAGING
15 kg bag

One-component lightweight cementitious adhesive with very high yield, with an internal technology that combines high performance and easy trowelability with a reduction in the formation of dust during the mix preparation phase. Very low VOC emission values ​​(EC1 plus).

FIELDS OF APPLICATION
• Laying all types of ceramic material indoors and outdoors (porcelain stoneware, double-fired, single-fired, Klinker).
• Laying of thin porcelain stoneware slabs without reinforcing mesh
• Indoor and outdoor laying of stone materials, provided they are dimensionally stable and insensitive to humidity
• Laying of ceramic tiles on heated floors and cement-based render
• Bonding of materials insulating and/or sound-absorbing materials such as expanded polystyrene and polyurethane, rock wool or glass
• Installation on prefabricated concrete walls and on seasoned concrete substrates
• Overlaying of ceramic on ceramic, stone material, suitably prepared tiles
• Laying on cementitious and anhydrite screeds, after adequate preparation and application of PRIMER GS
• Laying of floors and walls on substrates waterproofed with ADEPROOF membranes.

COLORS

White and grey

PACKAGING
15 kg bag

Cementitious adhesive with extended open time for the installation of ceramic tiles.
APPLICATION
Installation of single and double fired wall and floor ceramic tiles with medium porosity.
COLOURS
White and grey
PACKAGES
25 kg bag