Cementitious adhesive with extended open time for the installation of ceramic tiles.
APPLICATION
Installation of single and double fired wall and floor ceramic tiles with medium porosity.
COLOURS
White and grey
PACKAGES
25 kg bag

Anti-corrosive cementitious grout for reinforcing irons.
APPLICATION
• Protection from corrosion of reinforcing irons in concrete
• Adhesion promoter for restoration grouts
COLOURS
Blue
PACKAGES
4×5 kg box

S1 deformable, lightweight, rapid-setting, one-component cementitious adhesive with an internal technology that combines very high performance and easy trowelability with a reduction in the formation of dust during the mix preparation phase. Very low VOC emissions (EC1 plus).

FIELDS OF APPLICATION
• Indoor and outdoor installation of all types of ceramic material (porcelain stoneware, double-fired, single-fired, Klinker)
• Installation of thin porcelain stoneware slabs without reinforcing mesh
• Indoor and outdoor installation of materials stone, provided they are dimensionally stable and insensitive to humidity, which require the use of quick adhesives
• Installation of ceramic tiles on heated floors and cement-based plasters
• Installation of floors subject to heavy traffic
• Installation on deformable substrates: plasterboard, fiber cement, marine plywood , wooden agglomerates (provided they are stable in water, free from treatments and adequately prepared) and when it is necessary to reduce the load on the load-bearing structures
• Laying ceramic and stable stone material on balconies, terraces, flat roofs, subject to direct radiation and sudden changes in temperature •
Laying on prefabricated concrete walls and on cured concrete substrates
• Laying ceramic on ceramic, stone material, tiles (suitably prepared) where it is necessary to reopen them quickly for operation
• Laying on cementitious and anhydrite screeds, after adequate preparation and application of PRIMER GS
• Laying of floors and walls on waterproofed substrates with ADEPROOF sheaths

COLORS
White and grey

PACKAGING
15 kg bag

Single-component, very highly performing lightened cementitious adhesive, highly deformable S2, with an internal technology combining very high performance and easy spreadability with reduced dust formation while preparing the mix. Very low VOC emissions (EC1 plus)

APPLICATION
• Indoor and outdoor installation of every type of ceramic material (porcelain stoneware, double firing, single firing, klinker)
• Installation of thin slabs in porcelain stoneware without reinforcing mesh.
• Indoor and outdoor installation of stone materials, if dimensionally solid and non-absorbing
• Installation of ceramic tiles on heating floors and cementitious renders
• Bonding of insulating and/or sound-absorbing materials such as foam polyurethane and polystyrene, rock or glass wool, cork.
• Installation of floors with heavy traffic
• Installation on deformable substrates such as gypsum board, asbestos cement, marine-type plywood, wood composition panels (solid to water and not treated) and when it is necessary to reduce the load on the bearing structures.
• Installation of ceramic and solid stone material on façades, balconies, terraces and sun stone pavements, subject to direct sun rays and sudden temperature changes
• Installation on prefabricated concrete walls and on cured concrete substrates
• Installation of ceramic tiles on ceramic, stone material and terrazzo tiles suitably prepared
• Installation on cementitious and anhydrite screeds, after suitable preparation and application of PRIMER GS
• Installation of wall and floor ceramic tiles on substrates water-proofed by ADEPROOF membranes.

COLOURS
Withe and Grey

PACKAGES
15 kg bag

White extra-fine levelling grout for render and concrete walls with smooth finishing.
APPLICATION
• Levelling of renders based on lime and cement
• Levelling of smooth concrete free of oily strippers indoors
• Levelling of Adesan restoration renders
COLOURS
White
PACKAGES
20 kg bag

Lime-cement skim coat with excellent whiteness and excellent workability, for fresh and seasoned plasters. Civilian finish. Very low VOC emission values ​​(EC1 plus).
FIELDS OF APPLICATION
• Finishing of traditional or premixed lime-cement based plasters with the “fresh on fresh” technique.
• Finishing of traditional or seasoned lime-cement based premixed plasters.
• Recoatable with both mineral and synthetic paints or thin coatings.
COLORS
White
PACKAGING
25 kg bag

Universal water-repellent smoother, with very high adhesion.
FIELDS OF APPLICATION
• Smoothing before laying ceramic tiles
• Smoothing lime and cement-based plasters, even if painted
• Smoothing cement-based plasters
• Smoothing concrete
• Smoothing old plastic or mineral coatings that are consistent and well anchored
• Smoothing old ceramic and mosaic, provided they are stable and consistent
COLORS
White and gray
PACKAGING
25 kg bag

High adhesion water-repellent skim coat for plastic and concrete coatings.
FIELDS OF APPLICATION
• Smoothing old solid and well-anchored plastic or mineral coatings
• Smoothing old solid and well-anchored quartz paint
• Smoothing before laying ceramic tiles
• Smoothing cement-based plaster
• Smoothing concrete
COLORS
White and gray
PACKAGING
Bag of 25kg