Salt-resistant mortar for dehumidifying, macroporous, lime-based and eco-pozzolana-based plasters for the restoration of damp masonry, including historic ones. Very low VOC emissions (EC1 plus).
FIELDS OF APPLICATION
• Restoration of brick or porous stone walls affected by rising damp.
• Formation of dehumidifying plaster on structures located near wetlands.
• Recovery of masonry degraded by efflorescence.
• Restoration of plaster of artistic interest (historic centres, churches, villas) under the protection of the Superintendence for Architectural and Environmental Heritage, where a definitive restoration is required in respect of the original materials.
COLORS
White
PACKAGING
25 kg bag

Traditional lime-based bonding mortar to be applied before restoration plaster ADESAN CALCE INTONACO WHERE TO USE ADESAN CALCE INTONACO bonding
layer
for restoration plaster on:
• old and new brick masonry
• masonry with strong saline efflorescence
• masonry in stone and tuff
COLORS
White
PACKAGING
20 kg bag

Premixed machine and hand dehumidifying plaster for the restoration of damp masonry and the plastering of new masonry.
FIELDS OF APPLICATION
• Restoration of brick walls affected by rising damp
• Restoration of porous stone walls
• Recovery of walls degraded by saline efflorescence
• Highly breathable background plaster for new walls
COLORS
Gray
PACKAGING
25 kg bag

Transpiring base plaster based on natural hydraulic lime (NHL) and eco-pozzolan.
FIELDS OF APPLICATION
• Realization by machine or by hand of new breathable plasters inside and outside on stone, brick, tuff and mixed masonry not subject to capillary rising damp • Realization
of new plasters or reconstruction of old lime-based plasters on masonry of historical and artistic value
• Pointing of courses between stones, bricks and tuff on “face-to-face” masonry
COLORS
Beige
PACKAGING
25 kg bag

Single-component powder adhesive/levelling grout for the installation of over-coating insulating panels.
APPLICATION
For the indoor and outdoor installation of insulating panels with suitable and consistent surfaces:
• Foam and extruded polystyrene
• Foam polyurethane
• Glass wool with suitable density
• Rock wool with suitable density
• Insulating cork
• Sound-deadening panels on the following substrates: traditional renders, concrete, bricks and cement blocks.
• Especially recommended for the final levelling of insulating panels, with suitable and consistent surface.
COLOURS
Grey
PACKAGES
25 kg bag

Single-component powder adhesive – skim coat for laying insulating panels.
FIELDS OF APPLICATION
Internal and external laying of insulating panels with suitable and compliant surfaces:
• Expanded and extruded polystyrene
• Expanded polyurethane
• Glass wool of suitable density
• Rock wool of suitable density
• Insulating cork
• Sound-absorbing panels on following types of support: traditional plasters; concrete brick masonry and cement blocks
• Particularly suitable also for the final smoothing of insulating panels with a suitable and compliant surface
COLORS
White and Gray
PACKAGING
25 kg bag