Application and functions

Schlüter-KERDI-LINE-VARIO is a linear waste system that can be shortened to the desired length for creating floor-level showers with ceramic tiles, natural stone or other coverings.

The KERDI-LINE-VARIO horizontal drain consists of a drain body and an adapter. The waste body is characterized by an extremely flat sinusoidal outlet that can be swiveled through 360° with an integrated odor trap. Its sinusoidal shape favors a high flow rate of the water in the floor drain thus obtaining a self-cleaning effect.

The acoustic deadening element included in the kit prevents the noise from the drain body from being transmitted to the adjacent walls or floor. It also performs the function of positioning guide in case of installation directly against the wall. The adapter with integrated Schlüter-KERDIFLEX plug is supplied already inserted into the sinusoidal drain in such a way as to guarantee its tightness and is fixed to a circular clamp. By loosening the circular clamp it is possible to rotate the sinusoidal drain by 360° in order to be able to connect the drain to the building drain, whatever the situation that arises on site.

In the KERDI-LINE-H 50 the drain adapter can be adjusted in height according to the requirements of the building site.

The KERDI-LINE-VARIO outflow profiles are available in two different designs. They can be cut to the desired size up to a minimum length of 22 cm and adjusted in height. They are supplied with 2 special closing terminals.

Schlüter-KERDI-LINE-VARIO COVE is a drainage profile with a visible groove and can be cut to the desired length. It is equipped with a visible slot, only 8 mm wide and 140 mm long. It is optionally available in V4A stainless steel or powder-coated aluminum with a TRENDLINE finish and in lengths of 120 cm and 180 cm.

Schlüter-KERDI-LINE-VARIO WAVE is a flow profile with W-groove and can be cut to any desired length. This profile is also available optionally in V4A stainless steel or powder-coated aluminum with TRENDLINE finish and in the lengths 120 cm and 180 cm.

In the painted aluminum version the profiles are available in two widths: 34 mm and 42 mm. In the slimmest version, the central exhaust slot is just 14 mm wide and 140 mm long. In the 42 mm wide version, the discharge slot is 24 mm wide and 140 mm long and offers a suitable space for inserting an optional hair filter.

In the stainless steel version, the profile is 42 mm wide, the discharge slot is 25 mm wide and 140 mm long and also offers a space suitable for inserting an optional hair filter.

All KERDI-LINE-VARIO WAVE profile versions are equipped with a matching removable cover in the middle. Find the images on p. 7

The KERDI flexible plug, already integrated in the drain adapter, guarantees a perfect connection between the channel and the horizontal and vertical waterproofing system. The construction site protection in transparent plastic guarantees its integrity during the assembly phase.
Combined with the waterproofing systems Schlüter-KERDI, Schlüter-DITRA, Schlüter-DITRA-HEAT or Schlüter-KERDIBOARD with the relative adhesives Schlüter-KERDI-COLL or Schlüter-KERDI-FIX, the KERDI-LINE channels become part of a certified system with abP test (allgemeines bauaufsichtliches Prüfzeugnis), compliant with German standard DIN 18534. The moisture resistance classes according to abP can be found in the relevant data sheets. In accordance with ETAG 022 (sealing in combination with other materials), Schlüter-KERDI-LINE is a system component with European approval (ETA = European Technical Assessment). The aforementioned Schlüter products certified with KERDI-LINE carry the CE mark.

Note:
KERDI-LINE-VARIO requires the creation of a screed on site. The screed made on site is waterproofed on the surface, preferably with DITRA (technical data sheet 6.1) or with -DITRA-HEAT (technical data sheet 6.4). The Schlüter-SHOWERPROFILE-S and -R profiles allow the lateral closure of the sloping shower surface towards the non-inclined floor and/or the wall (data sheet 14.1). To allow adequate closure of the lateral differences in height, the SHOWERPROFILE-S profiles are wedge-shaped. The adjacent walls are waterproofed with KERDI (technical data sheet 8.1) or with KERDI-BOARD (technical data sheet 12.1).

Application and function

Schlüter®-KERDI-SHOWER-L is a 2% sloped panel, divided into two parts and already waterproofed with the Schlüter®-KERDI sheath, suitable for creating floor-level showers. The non-woven fabric allows perfect anchoring of the ceramic covering and keeps the two pieces of the panel welded together, already prepared for the central insertion of the Schlüter®-KERDI-LINE channel.

Application and functions

Schlüter®-SHELF-E are shelves for corner installation, in three different geometric shapes. They are available in brushed stainless steel and aluminum with a high-quality and durable TRENDLINE three-colour finish, in the designs FLORAL, CURVE, PURE, SQUARE and WAVE. The shelves can be laid at the same time as the tiles are laid or they can be inserted with the 2 mm thick tabs into the joints after laying the wall tiles. Schlüter®-SHELF-E are useful supports in the bathroom, and can also set up a ceramic covering in the kitchen.

Application and function

Schlüter®-SHOWERPROFILE-S is a wedge profile made of a visible surface of brushed stainless steel and is suitable as a decorative closing profile in floor-level showers with a slope of 2%. On the back, the profile has a non-woven fabric that allows it to be anchored to the glue. The part that acts as a support is in rigid PVC and made in the shape of a U in different heights. The wedge profile can be cut to size to perfectly cover the lowest to highest point area and can be used both right and left handed.

Schlüter-SHOWERPROFILE-R is a profile made in two parts, suitable for the decorative closure of the area between the shower tray and the rear wall, where the channel is positioned. The visible part of the profile is in brushed stainless steel and the back has a non-woven fabric for perfect anchoring to the glue. Thanks to the division into two parts, the profile can be used in areas with a height ranging from 23 mm to 45 mm (two versions).